Compact Nozzle Enables Injection on the Inside Surface of Part
Thermoplay displays its newly expanded small nozzle series featuring the valve gate F mini nozzle, Ø11 at NPE2018.
At NPE2018, Thermoplay displays its newly expanded small nozzle series featuring the valve gate F mini nozzle, Ø11. Designed to meet the increasing requirements of special applications in cosmetic, medical and food packaging markets, the nozzle features a small pitch and is now available for valve gate applications. The F Ø11 valve gate nozzle has a minimum pitch of 17 mm. Because of its compact profile, the nozzle is useful in restricted areas and enables injection on an “inside” surface of the part. The nozzle and tip design enable low thermal dispersion, giving maximum flexibility to the moldmaker in designing the cooling system.
The patented Thermoplay heaters uniformly distribute heat along the whole nozzle surface, providing low energy consumption (at 150W maximum per nozzle). Thermoplay says that the moldmaker can easily replace the tip for maintenance with the mold installed in the injection machine. Valve-gate actuation can be pneumatic or hydraulic, individual- or plate-actuated, which Thermoplay says makes the nozzles useful for high-cavitation applications requiring increased precision. The pin, available in a cylindrical or conical option, is designed to minimize the witness mark on the part (gate diameter from 0.8 to 1.2 mm) providing the highest quality finish. Thermoplay says that the FØ11 valve gate nozzle series combine flexibility and quality and are available in lengths from 56 to 146 mm.
Related Content
-
NPE2024 Wrap-Up: Sustainability Dominates Show Floor News
Across all process types, sustainability was a big theme at NPE2024. But there was plenty to see in automation and artificial intelligence as well.
-
General Polymers Thermoplastics to Further Expand Distribution Business
NPE2024: Following the company’s recent partnership buyout, new North American geographic territories are in its sight.
-
Attending NPE2024 From the Perspective of a Molder
NPE2024 has come and gone, but before it’s completely in our collective rearview, Plastics Technology asked Rodney Davenport, vice president at injection molder CH3 Solutions, for a processor’s perspective on the big show.