PlasticComp Extrudes LFT Pipes & Profiles
The system uses crosshead profile dies to coextrude fiber tows and unidirectional tapes as continuous axial reinforcement in the extruded profile.
A patent-pending manufacturing line for extruding long-fiber thermoplastic (LFT) pipes, beams, and other structural profiles has been installed and commissioned by ., Winona, Minn. The system uses crosshead profile dies to coextrude fiber tows and unidirectional tapes as continuous axial reinforcement in the extruded profile. Polymer is delivered from a 3.5-in. extruder, providing profile outputs up to 800 lb/hr, depending on profile thickness and fiber content. In two initial development applications, 2-in.-wide rectangular beams and 6-in.-diam. tubes were coextruded with unidirectional glass tapes as the axial reinforcement. The matrix materials were long-glass PE and TPU compounds. PlastiComp says the system can use any melt-processable polymer.
Related Content
-
Tight-Tolerance Molder Dips Toe in Extrusion Waters
Midwest Precision Molding brings extrusion capacity in-house to assist a customer that was having a sourcing issue with its existing overseas suppliers.
-
‘Revolutionary’ Extrudable PPS for Sustainable Piping
Syensqo’s Ryton PPS XE-5000NA boasts exceptional chemical and permeation resistance.
-
Making Gains in the Drain Game
AWD blends extrusion and thermoforming technologies with plenty of home-brewed equipment and processes to keep water away from where it isn’t supposed to be.