Rodon Beats the Heat with 'Green' Cooling Towers
Custom molder The Rodon Group recently upgraded its plant in Hatfield, Pa., with three new cooling towers that replaced units that had been in service for 25 years.
Custom molder The Rodon Group recently upgraded its plant in Hatfield, Pa., with three new cooling towers that replaced units that had been in service for 25 years. The three towers have 240 tons of capacity and were installed during the plant shutdown for the July 4 holiday weekend. The move allowed Rodon (rodongroup.com) to increase its cooling capacity within the same footprint as the previous towers. In keeping with the facility’s commitment to “green” practices, the new towers were also designed to reduce water loss and power usage, and the old towers were recycled. The new units are made of non-corroding fiberglass/plastic composite.
“Through the hottest summer in recent memory, the new towers have maintained a remarkably consistent water temperature,” says Lowell Allen, sr. vp of manufacturing. “Our cooling capacity was increased by 40%, while cutting the energy consumption in half. We won’t know how much less water we are consuming for a few months, though we expect to reduce water usage by 20% or more. All of this while requiring almost no maintenance.”
The cooling system was furnished by Thermal Care, Niles, Ill.
Related Content
-
Water Temperature Control Upgraded and Integrated into Machine Control
Engel’s new eco-flomo temperature control system continuously monitors injection mold cooling and temperature control circuits, displaying pressure, temperature and flow rate values.
-
Is Your Water System Setup Helping or Hurting Your Molding Plant Productivity?
The plant water system is a critical component of an injection molding facility. A poorly designed or maintained water-cooling system can have a serious impact on production efficiency and cause many maintenance issues. Here’s what you need to know — and ask — to prevent those problems.
-
North American Distribution for System to Track Cooling-Circuit Temperatures, Flow Rates
Globeius is now a North American supplier of Mouldpro’s Flosense 1.0 Flexible Flow Monitoring system for tracking manifold pressures and mold temperatures.