At NPE: 3D Printed Molds
UV photopolymer produces short-run cavity inserts.
At booth W2703, is showing several developments in tooling. One is a demonstration of how short-run injection mold core/cavity inserts can be built in-house on short notice using 3D printing. Milacron demonstrates this with a PolyJet sysem from that inkjet prints droplets of thermosetting liquid photopolymer that solidify when exposed to UV light. Inserts were thus “grown” in 5 hr and loaded into a quick-change MUD mold base from , Madison Heights, Mich. (photo). The inserts last for about 500 shots.
Related Content
-
Hot Runners: How to Maintain Heaters, Thermocouples, and Controls
I conclude this three-part examination of real-world problems and solutions involving hot runners by focusing on heaters, thermocouples, and controls. Part 3 of 3.
-
Design Your Tools for Moldability ... and Maintenance
In the initial design phase, when considering the structure and elements of the tool, are you designing them to be maintenance friendly? Canon Virginia has used this approach and preventive maintenance to make tool replacement a thing of the past. You can, too. Here’s how.
-
Where and How to Vent Injection Molds: Part 3
Questioning several “rules of thumb” about venting injection molds.
