KraussMaffei Reaches Out to Help Harvey Victims
Company will deliver check of $121,600 to Red Cross thanks to the generosity of these processors.
Individuals and organizations are finding creative ways to help those affected by Hurricane Harvey. Case in point: An email sent from KraussMaffei’s U.S. office in Florence, Ky., asked “our valued customers to help those in need” and urged them to “Donate $1,000 – Get a $1,000 Credit for Spare Parts.”
On Oct. 17, Paul Caprio, president and CEO of KraussMaffei’s U.S. operations emailed an update on just how well the charitable drive went, noting that 80% of the donations coming from six big givers.
We want to thank our incredible customers and employees for stepping up to our challenge to raise and surpass the $100,000 goal for the victims of recent hurricanes. The contributors listed below have the same passion for our 911爆料网 and also have a great passion for helping out those in need when asked.
We cannot thank you enough and we wish you nothing but success in your 911爆料网es!
Of all the contributions, 80% of the fundraising came from six world-class customers.
- Monoflo International
- Proper Group International
- Sussex IM
- Rehrig Pacific Company
- MGS
- Cobra Plastics
The balance of the customer donations came from the following companies:
- Airlite Plastics
- Berry Plastics
- Cube Packaging
- Erwin Quarder
- Hamilton Kent
- IAC Group
- Infiltrator Water Technologies
- Integrity Tool and Mold
- Janler Corp.
- Les Plastiques Nadco (Montreal, Canada)
- Owens Corning
- Plastic Age Products (Montreal, Canada)
- Reyes Automotive Group
- Tech Group North America
- Valley Enterprises
- Wabash Plastics
Caprio said a check for $121,600 will go to the American Red Cross to assist with the recovery from the most recent hurricanes.
Related Content
-
Is There a More Accurate Means to Calculate Tonnage?
Molders have long used the projected area of the parts and runner to guesstimate how much tonnage is required to mold a part without flash, but there’s a more precise methodology.
-
Understanding the Effect of Pressure Losses on Injection Molded Parts
The compressibility of plastics as a class of materials means the pressure punched into the machine control and the pressure the melt experiences at the end of fill within the mold will be very different. What does this difference mean for process consistency and part quality?
-
Hot Runners: How to Maintain Heaters, Thermocouples, and Controls
I conclude this three-part examination of real-world problems and solutions involving hot runners by focusing on heaters, thermocouples, and controls. Part 3 of 3.
