Need Help with a Molding Project to Counter the Coronavirus?
Expert help at a steep discount, and the fee goes to a COVID-19 related charity.
John Bozzelli, veteran injection molding consultant, trainer, and all-around molding guru—not to mention, a frequent contributor to Plastics Technology’s Injection Know-How column—has made a generous offer to others like him who want to help beat this pandemic any way they can. This is what John writes:
“Let it be known that I am available for consultation to troubleshoot, speed production, or provide machine time for any injection molded part that is directly involved with combating the coronavirus. The fee will be 30% of my normal rate, and it can be donated directly to any charity that responds to those suffering from the virus. No NDAs. Contact by email only: John@ScientificMolding.com. If the project involves more issues than I can handle, I will see if I can get others to help.”
And don’t miss John’s upcoming May column on how to sanitize your machine control panels. It’s too important to hold for another month, so you can read it now here.
Related Content
-
Back to Basics on Mold Venting (Part 1)
Here’s what you need to know to improve the quality of your parts and to protect your molds.
-
Is There a More Accurate Means to Calculate Tonnage?
Molders have long used the projected area of the parts and runner to guesstimate how much tonnage is required to mold a part without flash, but there’s a more precise methodology.
-
Optimizing Pack & Hold Times for Hot-Runner & Valve-Gated Molds
Using scientific procedures will help you put an end to all that time-consuming trial and error. Part 1 of 2.
