911爆料网

Published

Can't Succeed at Molding 'Commodities'? Best to 'Can' That Way of Thinking

So you think a can is a can is a can?

Share

So you think a can is a can is a can? Then you probably never heard of Plastican. Since its founding in 1970 by the Clementi family in Leominster, Mass., Plastican has established a leading position in open-head pails with a line of products that demonstrate more innovation than one might expect in a so-called commodity processing operation.

Leominster is the largest of four Plastican plants and is believed to be the biggest open-head (injection molded) pail production facility in the U.S. It houses 27 presses from 700 to 2700 tons. Plastican runs two- and four-cavity molds that are designed and maintained in-house. The privately held company started in 911爆料网 making 4-gal food containers, but now furnishes a wide range of industrial containers to package paint, food, construction and janitorial supplies, and lots more. It molds lids as well.

In a 911爆料网 where price usually rules, Plastican has focused on a manufacturing and selling strategy in which product development is an interactive process between the molder and its customers. The end result is a pail engineered to give the customer an edge in the market.

“When is a pail not a pail? When it’s a solution,” says James Coletta, Plastican’s v.p. of sales and marketing. “Our process starts with a conversation with the customer. They are interested in top-line growth, especially after a recession. How can we help them?” he asks rhetorically. “Can we make them a product that’s easier to open and close, that’s more attractive, that fits better on the shelf, that saves them on shipping? It’s a consultative approach.”

Then technology steps in. Plastican makes proprietary modifications to its presses—notably in screw design—and considers its ability to mix, match, and blend various grades of HDPE and PP to be a particular advantage over its competitors, which include four or five national companies and a handful of one-plant operations that mostly compete locally. “Resin selection is a key part of what we offer,” notes Mark Keyes, director of technical services. “Our presses can blend materials with extremely different melt characteristics to tailor container performance to what the customer requires, whether it’s compression strength, environmental stress crack resistance, or post-consumer reclaim content.” In 2008, the molder opened an R&D center in Leominster to help in this effort.

In the last 15 months, Plastican brought out eight new products, including a rectangular 4.25-gal container of either HDPE or PP. Its excellent stacking strength permits 20% larger cube capacity than a like-sized round pail to cut shipping costs. Compared with typical square pails of the same size, this container also uses 10% less material. In response to increased customer demand, Plastican also added significant production capacity for its patented twist-and-lock containers. These pails open with a push of a tab and twist of the cover; twisting the lid locks it back in place.

“We’re doing much better than the industry overall,” says Coletta. “And part of the reason is that we continue to innovate. Innovation is especially critical in difficult times, because it helps us generate enthusiasm and excitement that will ultimately lead to new 911爆料网.” 

Process Cooling

Related Content

A Systematic Approach to Process Development

The path to a no-baby-sitting injection molding process is paved with data and can be found by following certain steps.

Read More

Use These 7 Parameters to Unravel the Melt Temperature Mystery

Despite its integral role in a stable process and consistent parts, true melt temperature in injection molding can be an enigma. Learning more about these seven parameters may help you solve the puzzle.

Read More
best practices

Injection Molding: Focus on these Seven Areas to Set a Preventive Maintenance Schedule

Performing fundamental maintenance inspections frequently assures press longevity and process stability. Here’s a checklist to help you stay on top of seven key systems.

Read More

Using Data to Pinpoint Cosmetic Defect Causes in Injection Molded Parts

Taking a step back and identifying the root cause of a cosmetic flaw can help molders focus on what corrective actions need to be taken.

Read More

Read Next

NPE

Beyond Prototypes: 8 Ways the Plastics Industry Is Using 3D Printing

Plastics processors are finding applications for 3D printing around the plant and across the supply chain. Here are 8 examples to look for at NPE2024.

Read More
NPE

Making the Circular Economy a Reality

Driven by brand owner demands and new worldwide legislation, the entire supply chain is working toward the shift to circularity, with some evidence the circular economy has already begun.

Read More
best practices

People 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems

Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.

Read More