Full Line of Hardened Ejector Pins
Suited for molding with high-glass-content resins, Regal’s Thru-Tuff Ejector Pins are made from M-2 high speed steel.
Regal Components Inc. (East Providence, R.I.) has introduced the Thru-Tuff Ejector Pins line of hardened ejector pins in straight and shoulder styles, including a wide range of sizes, including larger diameters and longer lengths. Ideally suited for molding with high-glass-content resins, Regal Thru-Tuff Ejector Pins are made from M-2 high speed steel, and they feature heads annealed and hardened throughout to Rc 60-63. Regal says they are precision ground to a 4-10 RMS surface finish and 0.0003-in total tolerance.
Sizes range from 1/32 to 1/2-in pin diameter and lengths of 6, 8 and 10 inches. The pins are available from stock in all sizes including oversize and four-place decimal diameters. Straight and shoulder styles are in 1/2 to 4 inches in fractional diameters, as well as +0.0005, 0.001, 0.002 and 0.005 in. Non-standard diameters in 0.0001-in increments from 0.0309 in. can also be made to order. The pins are priced from $2.41 to $7.12 each, and a catalog that includes complete pricing is available upon request.
Regal Components has introduced the Thru-Tuff Ejector Pins line of hardened ejector pins targeting highly filled parts.
Related Content
-
What You Need to Know About Leader Pins and Bushings
There’s a lot more to these humble but essential mold components than you might suspect. Following the author’s tips could save much time, money and frustration.
-
Optimizing Pack & Hold Times for Hot-Runner & Valve-Gated Molds
Using scientific procedures will help you put an end to all that time-consuming trial and error. Part 1 of 2.
-
How to Achieve Simulation Success, Part 2: Material Characterization
Depending on whether or not your chosen material is in the simulation database — and sometimes even if it is — analysts will have some important choices to make and factors to be aware of. Learn them here.